The Mirage with Direct Response Electronics includes easy-to-use controls and a Motion Detection System. The Mirage is the only box awning that has a system to detect canopy motion, the most important element to prevent wind/weather damage. The Mirage automatically retracts when the canopy reaches a certain level of movement - you determine the movement level on the control panel.

Unlike most awnings, the Mirage has no vertical arms to interrupt graphics on the side of your motorhome. The Mirage is totally painted (arms and brackets) for the perfect finished look. Mirage lateral support arms are the strongest available, and are adjustable so the installer can vary the canopy pitch up to 3 ft. for the most suitable application.

Simply push a button to extend the Mirage to its full 10 ft. extension or stop it at any point for shade where you want it. Just push a button to retract the awning to its travel position. It locks automatically -- nothing to latch, tighten or lock. An optional wireless remote is available, and the 110V model has a manual override should power be lost.

The elegant acrylic canopy is housed in a durable, polar white aluminum case that blends into the sidewall of most motorhomes.

Direct Response Electronics
Motion Detection System
Carefree has the only awnings that have a patented system to detect canopy motion. The new Motion Detection System senses canopy movement, the most important element to prevent wind/weather damage. Anemometers (cups) mounted on the top of the RVs ONLY detect wind and may cause the awning to retract EVEN if the wind isn't causing motion of the canopy.

The Mirage automatically retracts when the canopy reaches a certain level of movement - you determine the movement level.

Easy-To-Use Control Panel
The Control Panel is located on the inside of your RV for easy access. Simply press the "power-on" button and then press the "extend" button to deploy your awning. You control wind sensitivity with the easy-to-read control panel. To retract the awning, simply push the "retract" button. You can also stop the awning at any point for partial extension.

To activate the Motion Detection System, press the "on" button and then choose from five different settings. The auto-retract movement settings range from High to Low.

You can easily see the sensitivity position of your Direct Response from inside your RV by glancing at the green light on the control panel.

Note: Custom striped fabrics run horizontal (right to left), not vertical.

If your RV does not have an awning rail, you will need to purchase that separately, as our awnings do not include it.

Please Choose:

center of arm to center of arm View Acrylic Colors View Hardware Colors Works with Direct Response Upgrade Kit Charges apply to the contiguous 48 states View Custom Colors